Tabla de contenido
Idiomas disponibles
Idiomas disponibles
9.Environment temperature:
10.Humidity:storage 40% R.H
Work 80%R.H
11.Attachment:electric cable one(2m)
Attention items
1.lt can't be used in places where the sun shines directly,the temperature is high(over)or
low(below)high humidity,high dust or seriously shaken.
2.lt should avoid being stricken when you add a heavy object to the platform.
3.When overloaded,it indicates"-OF-" and alarms "toot",and you should reduce the heavy object
on the platform.
4.lt can work within the regular voltage:voltage(too high or too low) can cause loss.
5.lf the plug is still on the power supply,the scale is Electrified even the switch is "off". please pull
out the plug when it is not used for a ling time.
6.Avoid cleaning the surface with strong solvent such as benzene, acetone and so on, otherwise,
the surface will be badly damaged.
7.Clean the dirty platform and the outer covering with dry cloth.Don't splash water, otherwise the
water will enter the scale to cause short circuit.
8.Please keep the body of the scale clean.
9.lt can switch off automatically when battery – powered is low.
Battery recharging
1.During the 1 st use and future use,the unit is required to be recharged for 20 hours
continuously, after the battery is fully charged, the unit can work about 25 hours of continous use
(or 40 hours of discontinous use)
2.lf the low battery indicator is automatically switched on,we need to repeat the above recharging
immediately, otherwise, the unit will be easily not working because of very low battery power
inside.
Installation steps:
1.Place the scale on the firm and flat table after opening.Put the four white dustproof rings on to
the four rubber feet,and then place it on the plate.
2.Use the four feet to adjust the level until the level sponge is in the center.Meanwhile make sure
that the four feet are on the platform,otherwise is can affect the weigh accuracy.
3.lf the power circuit is not in ground connection,you can connect the ground wirewith the
grounding.
4.Connect one end of the power circuit to the scale,and the other end to the socket.Don't connect
the samewire with high-power equipment,for the high-power equipment can affect weigh when i
lt works.
5.When there is nothing heawy on the platform,turn on the switch,all the indicators glitter and all
The indicating windows are zeros.When necessary,you can put a certain special purpose scale
Or packing materials on the scale,which can improve the weigh accuracy.Press"TARE"key to
Indicate zero if the heavy object exceeds the weight limit.
6.With kg and pound system, can select either kgs or lbs by the exchange button "kg/lb", it shows
kg when the light of "KG/LB" is off, shows lbs when the light of "KG/LB" is on.
P-4
storage
-20℃+55℃
work
0℃+40℃
Tabla de contenido
