Initial Setup; Setting Language - npg Mini DTR 16C Manual De Usuario

Mini DTR 16C
2. Installation
DC IN (connected
to the mains)
DC 5V 1,5A
Loop (It takes
the signal to
another TV) Entry to the an-
tenna signal
This pictures are only a reference. It would be different from final pro-
i
duct.
18
IR IN (connecting the infrared receiver for
remote control)
USB Jack
Just to update software
Scart (to connect to TV)

3. Initial Setup

Setting Language

1. Press <menu> button to enter
Main Menu.
2. Press <Left/Right> button to se-
lect SETUP option.
3. Press <Up/Down> button to se-
lect Installation option.
4. Press <OK> button to enter Installation page.
5. Press <Up/Down> button to se-
lect OSD Language option.
6. Press <Left/Right> button to se-
lect a language.
How to receive the programs?
Scan the possible frequency and bandwidth to receive the programs.
1. Press <menu> button to enter Main Menu.
2. Press <Left/Right> button to select SETUP option.
3. Press <Up/Down> button to select Installation option.
4. Press <OK> button to enter Installation page.
5. Press <Up/Down> button to select Country Setting option.
6. Press <Left/Right> button to set Country Setting.
7. Press <RED/GREEN> button to Auto Scan or Manual Scan.
If there is no database in the STB, it will start at step (5) when booting.
English