Replacement Parts; Troubleshooting; Technical Specifications - Beurer FC 65 Instrucciones De Uso

Unplug the charging base and allow it to cool. Clean it with a soft, slightly moistened cloth, then wipe dry with a
soft, lint-free cloth.
To clean the Brush Head after each use, pull it from the Brush Handle and rinse under running water.
To reorder a Replacement Brush Head, contact Customer Service. We recommend replacing the Brush Head
after every four months of use.
Disposal
Observe the local regulations for material disposal. Dispose of the device in accordance with local regulations.
If you have any questions, please contact the local authorities responsible for waste disposal.

9. Replacement Parts

Brush type
Intended purpose
Skin type
Replace
Item number and/or order number 604.91

10. Troubleshooting

Problem
The device does not charge.
The device will not switch on.
The device does not cleanse as
well as it did to begin with.

11. Technical Specifications

Power Supply
Input:
Output:
Dimensions
Weight
Battery Pack Capacity
Battery Pack Voltage
Battery Type
Subject to errors and changes.
Brush head
Daily cleansing
All skin types
After 4 months
Ensure that the charger is connected to a functioning socket and that the device
is correctly positioned on the charger. If the device still fails to charge, contact
Customer Service.
When switching the device on, ensure that you press the ON/OFF/Speed Button
with sufficient force and hold the button for a sufficient amount of time. Charge
the device as described in these instructions for use. If it is still not possible to
switch the device on, contact Customer Service.
The brush is worn. Replace the Brush Head. Replacement heads can be ordered
from Customer Service.
100-240 VAC, 50/60 Hz, 0.2 A
3.6 V 500 mA
Brush incl. attachment: 6.3 x 2.2 x 3 in (16 x 5.6 x 7.5 cm)
Charging base: 3.3 x 2.4 x 2.2 in (8.5 x 6.2 x 5.5 cm)
Brush incl. attachment: 161 g (5.68 oz)
Charging base: 64 g (2.26 oz)
600 mAh
2.4 V
NiMH
6
Solution