Hama 00042511 Instrucciones De Uso página 3

6.2 Changing channel
• The Hama RF modulator offers you the option of using
all UHF channels from channel 21 to 69.
• Some channels are already assigned by existing
transmitters. This could lead to interferences.
• We recommend that you select a free channel when
using the modulator, to prevent any interferences.
• You can change the set standard channel by pressing
the CH i and CH h buttons.
• Move down through the channels by pressing the
CH i button and move up through the channels by
pressing the CH h button.
• The set channel is automatically saved.
Note
Each time a channel is changed on the RF modulator,
the channel on your TV/VCR must be adjusted
accordingly and saved.
6.3 Resetting the modulator to factory settings
To reset the RF modulator to factory settings, proceed
as follows:
• Switch the modulator off
• Press and hold the CH i and CH h buttons
• Switch the modulator back on and release the CH i
and CH h buttons
• The RF modulator is set back to the standard channel 36
Note
When using a different power supply unit, make sure
that the features match!
7. Care and Maintenance
• Only clean this product with a slightly damp, lint-free
cloth and do not use aggressive cleaning agents.
• Make sure that water does not get into the product.
8. Warranty Disclaimer
Hama GmbH & Co. KG assumes no liability and provides
no warranty for damage resulting from improper
installation/mounting, improper use of the product or
from failure to observe the operating instructions and/
or safety notes.
9. Service and Support
Please contact Hama Product Consulting if you have any
questions about this product.
Hotline: +49 9091 502-115 (German/English)
Further support information can be found here:
www.hama.com
10. Recycling Information
Note on environmental protection:
After the implementation of the European
Directive 2012/19/EU and 2006/66/EU in the
national legal system, the following applies:
Electric and electronic devices as well as
batteries must not be disposed of with
household waste. Consumers are obliged by law to return
electrical and electronic devices as well as batteries at
the end of their service lives to the public collecting
points set up for this purpose or point of sale. Details to
this are defined by the national law of the respective
country. This symbol on the product, the instruction
manual or the package indicates that a product is subject
to these regulations. By recycling, reusing the materials
or other forms of utilising old devices/Batteries, you are
making an important contribution to protecting our
environment.
3