Presetting Stations; Preset Number Tuning - Aiwa NSX-F77 Manual De Instrucciones

PRESETTING STATIONS

The unit can store a total of 32 preset stations. (Each band has
a maximum of 20 available preset stations.) When a station is
stored, a preset number is assigned to the station. Use the preset
number to tune in to a preset station directly.
1 Press the TUNER/BAND button to select a band,
and press the r DOWN or t UP button to
select a station.
2 Press the a SET button to store the station.
A station is assigned a preset number, beginning from 1 in
consecutive order for each band.
Frequency
3 Repeat steps 1 and 2.
The next station will not be stored if a total of 32 preset stations
for all the bands or a total of 20 preset stations for one band
have already been stored.
Preset number

PRESET NUMBER TUNING

Use the remote control to select the preset number directly.
1 Press the TUNER/BAND button to select a band.
2 Press the numeric buttons to select a preset
number.
Example:
To select preset number 15, press the +10 and 5 buttons.
To select preset number 10, press the +10 and 0 buttons.
Selecting a preset number on the main unit
Press the TUNER/BAND button to select a band. Then, press
the d DIRECTION/PRESET button repeatedly.
Each time the button is pressed, the next highest number is
selected.
To clear a preset station
Select the preset number of the station to be cleared. Then, press
the s CLEAR button, and press the a SET button within 4
seconds.
The preset numbers of all other stations in the band with higher
numbers are also decreased by one.
To change the AM tuning interval
The default setting of the AM tuning interval is 10 kHz/step. If
you use this unit in an area where the frequency allocation system
is 9 kHz/step, change the tuning interval.
Press the POWER button while pressing the TUNER/BAND
button.
To reset the interval, repeat this procedure.
When the AM tuning interval is changed, all preset stations are
cleared. The preset stations have to be set again.
En
8
ENGLISH