Tabla de contenido
Idiomas disponibles
Idiomas disponibles
iN
LLAT! N INST UCTI NS
FLOORING
TO minimize noise and vibration, the washer
MUST be installed on a soBidBy constructed
floor.
See the NOTE at right.
AHowabBe sBope under the entire washer is
1o maximum.
Carpeting and soft tiBesurfaces are not
recommended.
Never install the washer on a platform or weakBy
supported structure. Use onByan approved
accessory pedestaB as described beBow.
NOTE: PBease note that the floor must be strong
and rigid enough to support the weight of the
washer when fully loaded, without flexing or
bouncing. Rfyour floor has too much flex in it,
you may need to reinforce it to make it more
rigid. A floor that is adequate for a topqoading
washer may not be rigid enough for a front-
loading washer, due to the difference in the spin
speed and direction. If the floor is not solid, your
washer may vibrate and you may hear and feel
the vibration throughout your house.
iNSTALLATiONS WiTH OPTIONAL
PI::DI::STAL BASF: OR STAcKiNG KiT
iMPORTANT:
If you are installing your washer
using an optional pedestal base or stacking kit,
please refer to the instructions for your pedestal
or stacking kit before proceeding with the
installation.
Required
Dimensions
for Installation
With Pedestam
Required
Dimensions
for Installation
With Stacking
Kit
(75.6 cm)
(10 cm)
771/2''
(190,5 cm)
1"-¢_1 _
27" _
_-1"
(2.5 cm)
(68.6 cm)
(2.5 cm)
10
Capítulos
Tabla de contenido
