Idiomas disponibles
Idiomas disponibles
COMBINATIONS OF
CUTTING ATTACHMENTS
Cutting attachment
KAC333-10''/25cm 0.043''/1.1mm 3/8 LP bar
KAC302-10''/25cm 0.043''/1.1mm 3/8 LP chain
KAC335-12''/30cm 0.043''/1.1mm 3/8 LP bar
KAC304-12''/30cm 0.043''/1.1mm 3/8 LP chain
INFORMATION WITH
EXTENSION SHAFT(KAC360)
NOISE DATA
A weighted sound
pressure
A weighted sound
power
Wear ear protection.
VIBRATION INFORMATION
Vibration total values (triax vector sum) determined
according to EN ISO 11680-1.
a
=1,3 m/s
h
Vibration
uncertainty
emission value
K=1,5 m/s2
INFORMATION WITHOUT
EXTENSION SHAFT
NOISE DATA
A weighted sound
pressure
A weighted sound
power
Wear ear protection.
VIBRATION INFORMATION
Vibration total values (triax vector sum) determined
according to EN ISO 11680-1.
a
=1.87 m/s
h
Vibration
uncertainty
emission value
K=1.5 m/s2
The declared vibration total value may be used for
comparing one tool with another, and may also be
L
= 79 dB(A)
pA
K
= 3 dB(A)
pA
L
= 94,1 dB(A)
wA
K
= 1,1 dB(A)
wA
2
L
= 82 dB(A)
pA
K
= 3 dB(A)
pA
L
= 93 dB(A)
wA
K
= 1,5 dB(A)
wA
2
used in a preliminary assessment of exposure.
WARNING: The vibration emission value
during actual use of the power tool can differ
from the declared value depending on the ways in
which the tool is used dependant on the following
examples and other variations on how the tool is
used:
How the tool is used and the materials being cut or
drilled.
The tool being in good condition and well maintained
Using the correct accessory for the tool and ensuring
it is sharp and in good condition.
The tightness of the grip on the handles and if any
anti vibration accessories are used.
And the tool is being used as intended by its design
and these instructions.
This tool may cause hand-arm vibration syndrome if
its use is not adequately managed
WARNING: To be accurate, an estimation of
exposure level in the actual conditions of use
should also take account of all parts of the operating
cycle such as the times when the tool is switched off
and when it is running idle but not actually doing the
job. This may significantly reduce the exposure level
over the total working period.
Helping to minimise your vibration exposure risk.
ALWAYS use sharp chisels, drills and blades
Maintain this tool in accordance with these
instructions and keep well lubricated (where
appropriate)
If the tool is to be used regularly then invest in anti
vibration accessories.
Plan your work schedule to spread any high vibration
tool use across a number of days.
ENVIRONMENTAL
PROTECTION
Waste electrical products must not be
disposed of with household waste. Please
recycle where facilities exist. Check with your local
authorities or retailer for recycling advice.
DECLARATION OF
CONFORMITY
We,
Positec Germany GmbH
Postfach 680194, 50704 Cologne, Germany
On behalf of Positec declare that the product
Description: Battery-powered pole saw
Type: KAC361 (361 - designation of machinery,
representative of pole saw)
Function: Cutting high branches
Complies with the following Directives:
EN
17
