VANTRUE Pilot 1 Manual De Instrucciones página 8

2.3 Flip the body over and place it in a suitable position on the center console
(wipe this position clean).
N E N EN E EN
2.4 Tear off the 3M adhesive protective film below the P1 body, attach the body
base to the appropriate position on the center console. If the center console
is not firmly attached, please lay the provided anti-skid pad on it, and then
attach P1 to the anti-skid pad.
Make the 3M adhesive stick firmly by pressing for more than 5
seconds at an ambient temperature of 15℃ or above.
- 4 -