LGB San Francisco Manual Del Usuario página 10

SERVICE
Lubrication
The axle bearings should be lubricated occasionally with a small amount of Märklin-
Oil (7149).
Changing Light Bulbs
Headlights:
- Turn the model over and lay it on a soft pad or towel.
- Loosen the two screws on the oor plate with the rail clearance device.
- Remove the oor plate.
- Carefully pull the lamp socket down.
- Change the light bulb.
- Put the model back together.
Interior Lighting and Route Sign:
- Remove the eight roof vents by pulling up.
- Loosen the screws under the roof vents (Figures 3/4).
- Lift the roof up to remove it.
- Take out the circuit board.
- Change the light bulb.
- Put the model back together.
Controllable Functions
1
Lighting
Sound effect: Long whistle blast
Sound effect: Squealing brakes off
Sound effect: Short whistle blast
Sound effect: Bell
Sound effect: Horn short
Sound effect: Operating sounds
Sound effect: Announcement
Sound on/off
ABV, off
Sound effect: Announcement
Interior lights
Sound effect: Announcement
Sound effect: Blower
Sound effect: Compressor
Sound effect: Announcement Sound effect: Letting off air
Sound effect: Rail joints
Sound effect: Wheels squealing
Sound effect: Pantograph
Surrounding sounds: City noise
Surrounding sounds: Passengers
1
active in analog operation
2
with random sounds
10
1, 2
LV + LR
1 Sound 1
2 BS
3 Sound 2
4 Sound 3
5 Sound 18
6 FS
7 Sound 6
8
9
10 Sound 5
11 AUX 1
12 Sound 4
13 Sound 9
14 Sound 11
15 Sound 13 16 Sound 7
17 Sound 15
18 Sound 16
19 Sound 12
20 Sound 19
21 Sound 17