Idiomas disponibles
Idiomas disponibles
6
MAINTENANCE
Before maintenance, please unplug the power source and shut off the water supply.
Regular maintenance is required to ensure that the product operates at optim
Maintenance of Lid, Seat, and Plastic Parts
Wipe the lid, seat, and plastic parts with a wet soft cloth (water).
Please wipe with water frequently or the product will become hard to clean later if the
dirt and debris is not removed on time. Wiping with water can also help prevent static
electricity from generating around the product, which can cause the product to
accumulate dust and become dirty.
For a deeper clean, the bidet can be removed from the toilet to access the surface
beneath. To remove the bidet seat, press the catch plate button located on the right side
of the bidet seat, then lift the bidet seat slightly to extract (do not remove the bidet by
force).
Maintenance of Steel Mesh Filter
For your health, as well as optimal performance of the
bidet seat, please c
If you notice that the water pressure is becoming weaker,
Please make sure to turn off the water supply completely
before remo
r. Attac
avoid leakage.
Turn the coin countercloc
brush to clean.
rly.
r.
ly to
Maintenance of the Nozzle
Press"Nozzle Clean" button without occupying the seat, the
nozzle will extend and can be cleaned with a soft brush.
Do not try to pull the nozzle out by force, or the nozzle may
break.
When the nozzle is clogged, it is recommended to replace it
with a new one.
14
cy.
