Idiomas disponibles
Idiomas disponibles
Model No.
Running HP
Bore
Stroke
Voltage-Single Phase
Minimum Branch Circuit Requirement
Fuse Type
Air Tank Capacity - Gallons
Approximate Cut-in Pressure
Approximate Cut-out Pressure
SCFM@ 40 psig
SCFM@ 90 psig
Refer to Glossary for abbreviations
SAFETY GUIDELINES - DEFINITIONS
This manual contains information that is important for you to know and
understand. This information relates to protecting YOUR SAFETY and
PREVENTING EQUIPMENT PROBLEMS. To help you recognize this
information, we use the symbols below. Please read the manual and pay
attention to these symbols.
situation which, if not avoided, will result
in death or serious injury.
which, if not avoided, could result in
death or serious injury.
IMPORTANT SAFETY INSTRUCTIONS
known (to the State of California) to cause cancer, birth defects or other
reproductive harm. Some example of these chemicals are:
•
lead from lead-based paints
•
crystalline silica from bricks and cement and other masonry products
•
arsenic and chromium from chemically-treated lumber
Your risk from these exposures varies, depending on how often you do this type
of work. To reduce your exposure to these chemicals: work in a well ventilated
area, and work with approved safety equipment, always wear MSHA/NIOSH
approved, properly fitting face mask or respirator when using such tools.
When using air tools, basic safety precautions should always be followed to
reduce the risk of of personal injury.
SPECIFICATION CHART
Indicates an
imminently hazardous
Indicates a potentially
hazardous situation
Some dust created by power sanding, sawing, grinding,
drilling, and other construction activities contains chemicals
.
which, if not avoided, may result in minor
or moderate injury.
indicates a potentially hazardous situation
which, if not avoided, may result in
property damage
3- ENG
919.167463
1.6
2.375"
1.35"
120V
15 amps
Time Delay
4
120
150
8.0
5.7
Indicates a potentially
hazardous situation
Used without the
safety alert symbol
.
A09709
