Bellelli PRODIGEE ICON Manual De Uso página 11

INSTALLING THE SUPPORT BLOCK
• Remove any baskets or bike racks if they obstruct the
installation operations.
• Remove the block cover.
Check that the brake and gear cables do not interfere with
the block.
max 5 Nm max 5 Nm
!
Warning: periodically check the tightness of the
screws. The fasteners may become loose with use.
EN
1
Install the
support block
around the bike
frame as shown
in the figure.
2
Insert the screws
into their seats.
3
Tighten the
screws of
the block after
finding the best
position for the
seat.
9