Sears Kenmore 385.17626 Manual De Instrucciones página 56

Tabla de contenido
Bar Tacking
Stitch width:
6) Stitch length:
(.3) Needle thread tension:
_4_Presser foot A:
2 to 6.5
0.5 to 1
2to6
Zigzag foot
This is similar to a very short satin stitch and is used
to reinforce
points of strain such as corners,
pockets
and straps of lingerie.
Sew four (4) to six (6) stitches.
Embroidery
Stitch width:
1 to 6.5
Q') Stitch length:
Any
Needle thread tension:
2 to 6
L_ Presser foot:
Removed
_.5_ Feed dogs:
Dropped
Drop the feed dog and remove the foot holder.
Adjust
stitch width as desired.
Draw a design onto
the fabric with tailor's chalk.
Stretch
the fabric
between
embroidery
hoops and place under the
needle.
Lower the presser foot lifter to engage
the needle
thread
tension.
Holding
the needle thread
in your
left hand, rotate the handwheel
counterclockwise
for
one complete
turn.
Pull the needle thread to draw the bobbin
thread to
the right side of the fabric.
At medium
speed,
stitch
along the marked
outline, guiding
the fabric carefully
by hand.
After embroidery
is completed,
raise the
feed dogs for normal
sewing.
f
\
f
_
WIDTH
_)
LENGTH
(_
@
_
WIDTH
@
_
LENGTH
@
@
52
Tabla de contenido
loading

Tabla de contenido