Quick Tools QU3104 Instrucciones De Uso página 26

Idiomas disponibles

2.9.1. Check the Soldering Iron

Allow the heating element to cool down to room temperature and unplug the

soldering iron from the soldering station. Measure the resistance between

connections 1 & 5 on the plug. If you find a value that differs from the value

below, replace the heating element or the connecting cable.

Between pin 1 & 5 (heating element): 11Ω +/-2Ω

2.9.2.Disassembling the Iron Handle

4. Pull out the spring⑤ from the D-type.

NOTE: Do not use metal tools such as pliers to remove tip or Tip enclosure

from the handle.

2.9.3 Measure the Resistance before

Replacing

NOTE: Measure the resistance when the heating element is at room

temperature.

3. Resistance value of heating element (Red) is 3~4Ω(ceramic heater).

4. Resistance value of sensor (Blue) is 43~58Ω(ceramic heater).

1. Turn the nut① counterclockwise and

remove out the tip enclosure② and the

tip③.

2. Turn the nipple④ counterclockwise and

remove it from the iron.

3. Pull both the heating element⑥ and the

cord assembly ⑪ out of the handle ⑫

(Towards the tip of the iron).

USER MANUAL