Idiomas disponibles
Idiomas disponibles
Installing the Cord Storage Brackets
Attach the brackets to the bench with two screws (BB)
per bracket. Orient the brackets with one pointed up
and one pointed down so that the power outlet cord
can be wrapped around the brackets for storage.
BB
Installing the Storage Shelf
Attach the shelf hinge brackets to the right or left
side of the work bench using two bolts (AA) for each
bracket. Attach the storage shelf to the brackets
using one washer (FF), nut (DD), and bolt (EE) on
each end.
Installing the Bottle Opener
Attach the bottle opener to the left side of the bench
using two screws (GG).
Installing the Power Cords
Locate the power cords inside the second right-hand
drawer and the left bottom drawer. There are power
strips located on the right side of the work bench
(SDL-6N) and inside the power drawer (SDL-04C).
Untie the power cords and gently pull the cord plugs
through the grommet.
capacity. Use care when moving the bench on
incline or rough surface. Bench may tip if weight
is not evenly distributed front to back and side
to side. Place more than half the total load weight
on the bottom drawers when possible.
NOTE: The drawers must be fully closed before
locking/unlocking the bench.
Insert the key. Turn it fully left to lock, or fully right
to unlock. Always remove the key after locking and
unlocking.
To lock the swivel casters,
step down on the levers
marked ON. Be sure to lock
all casters to prevent bench
from rolling or swiveling. To
unlock casters, push down
on the levers marked OFF.
Take care that the bench does not tip or become
DD
unbalanced when moving it on an incline or rough
AA FF
surface. Do not exceed an incline of 10 degrees.
Lock the bench and secure all items before moving.
The bench is only intended for rolling short distances.
Only roll the bench using the handle. Do not push or
pull bench by the frame or product may tip. Do not
EE
modify the bench in any way. Drilling holes or modi-
fying the bench will lower the load capacity, which
can cause the bench to collapse, resulting in injury.
Lock the bench and secure all items before rolling.
The bench is not intended to be lifted. How-
ever, if you need to lift, empty the bench and then
place straps or forks inside and next to casters.
WARNING! Do not lift loaded benches. Never lift by
the side handle. The bench may become unbalanced
and tip, resulting in injury. Be sure all bystanders are
moved away before lifting bench.
5
OPERATION
To avoid injury or property damage,
WARNING
do not exceed maximum drawer
Locking and Unlocking the Bench
Using the Caster Brakes
Moving the Bench on an Incline or
Rough Surface
Rolling the Bench
Lifting the Bench
