Idiomas disponibles
Idiomas disponibles
cable to be tested.
3. Attach the Fault Mapper to one end of the cable to be tested.
The cable attachment is via a BNC connector located at the top of the unit.
For unterminated cables use the alligator clip attachment provided.
Coaxial Cable:
Shielded Cable: Connect the Black clip to a wire adjacent to the
Twisted Pair:
Multi-conductor Cable:
Connect the Black clip to the center wire and the Red
clip to the shield/screen.
shield and the Red clip to the shield.
Separate out one pair and connect the red and black
