Ale-Hop 1558004 Manual De Usuario página 5

NOTE: Do not press the Roller Head
hard against your skin, as it will affect
the speed and results, use light, gentle
pressure and allow the Roller Head to
do the work.
· Move the Unit in a slow, back and forth
motion in 2-3second increments.
NOTE: Using the Product should not
cause pain or discomfort. If you feel
pain or discomfort, discontinue using
immediately.
· Stop and check to see if you have
achieved desired results. If not, go over
the area again or increase speed to the
Hl position for very rough and/or callu-
sed skin. If you feel pain or discomfort,
discontinue use immediately.
· To turn OFF the unit, slide the switch
down to OFF.
· Once complete, take a damp cloth and
wipe the area to remove any dead skin
or residue from your foot. Be sure to
dry promptly.
Removing/Replacing Roller Heads
Choosing the Correct Roller Head.
Coarse Roller Head:
Use the Coarse Roller Head to remove
calluses and dead skin.
Fine Roller Head:
Use the Fine Roller Head to keep your
feet feeling smooth.
· Be sure the unit is turned OFF before
removing or replacing the Roller Head.
· To release the roller head, push down
on the button located on the top of the
unit head.
· While holding down the button on the
top of the unit Head, pull the top of the
Roller Head, releasing it from the unit.