Jura E8 Manual De Uso página 23

Dismantling and rinsing the
fine foam frother
1
2
Press the 0 button several times until the JURA Cockpit is
T
ä ä ä ö
displayed on page
Press the
'Clean the milk system'
T
Press the 'Start' button.
T
'Clean the milk system'
Remove the milk pipe from the milk container or milk cooler.
T
Pour one dosing unit of milk system cleaner into the container
T
for milk system cleaning.
Place the container under the hot-water nozzle and the fine
T
foam frother and connect the milk pipe to the container.
E To connect the milk pipe to the container correctly, the pipe
must be fitted with a connector HP3.
Press the 'Next' button.
T
The fine foam frother and the milk pipe are cleaned.
The operation stops automatically.
If insufficient foam is produced when the milk is frothed or milk
sprays out of the fine foam frother, this may get dirty. If this hap-
pens, dismantle and rinse the fine foam frother.
Remove the milk pipe and rinse it thoroughly under running
T
water.
Remove the fine foam frother.
T
Dismantle the fine foam frother into its individual parts.
T
Rinse all the parts under running water. If there are severely
T
dried-on milk residues, firstly immerse the individual parts in a
solution of 8.5 oz (250 ml) water and one dosing unit of JURA
milk system cleaner. Then rinse the individual parts thoroughly.
of the start screen.
button.
/ 'Milk system cleaner'
7 Maintenance
en
es
fr
23