Jura E8 Manual De Uso página 17

Hot water
J CAUTION
Adjusting the grinder
Adjusting the product
settings
Open the cover behind the bean container.
T
Place one level measuring spoon of ground coffee into the filler
T
funnel.
Close the cover.
T
Press the 'Next' button.
T
The preset amount of water for espresso flows into the cup.
There is a danger of scalding from hot water splashes.
Avoid direct contact with the skin.
T
Place a cup under the hot-water spout.
T
Press the 'Hot water' button (on page ä ä ö ä).
T
The preset amount of water flows into the cup.
You can adjust the grinder to suit the degree of roast of your coffee.
The consistency of grind is correct if the coffee flows regularly from
the coffee spout. In addition a fine, thick crema forms.
Open the cover behind the bean container.
T
Turn the grinder adjustment switch to the desired position
T
Close the cover.
T
Touch a product for approximately 2 seconds to access the settings:
U
'Product settings': Specify individual settings such as coffee
strength, amount of water, etc.
U
'Replace product': Replace the products on the start screen
with your favorites.
Permanent settings in programming mode always follow the same
model.
4 Preparation
en
es
fr
17