Idiomas disponibles
Idiomas disponibles
EN
ES
8
OP:80
OP:81
Manual
Programming
9
OP:90
OP:91
Double Digit
OP:02
0
Clean filter
OP:03
Appendix. B Default Cook Times
The oven shall ship with the following Preset
Cook Times unless otherwise noted in the product
Specification.
Button
Display (Time)
1
0:10
2
0:20
3
0:30
4
0:45
5
1:00
6
1:30
7
2:00
8
2:30
9
3:00
0
3:30
Power Up
1.
When the oven is electrified for the first time, "_ _ _" will display. If
"
" button pressed, the oven will change to idle mode.
Note: Under idle mode, any button press will no response.
Idle Mode
2.
In Idle Mode, the screen will display "ECO"
Notes
1) In Pause Mode or REady Mode, if there is no operation of any
button within 1 minute and you have set "OP:40", "OP:41",
"OP:42" or "OP:43", the oven will enter to Idle Mode after 15,
30, 60, or 120 seconds correspondingly.
2) If foy press the "
work.
Ready Mode
3.
1) In this mode, the oven is ready to either begin a manual or pre-
set cook cycle.
2) Opening and closing the door while the oven is in Idle Mode
will put the oven into Ready Mode.
3) During Ready Mode, "READY" displays.
Door Open Mode
4.
1) While the door of the oven is open, the oven shall be in Door
Open Mode.
Notes:
1)
When the door is open, if User Option OP:60 is selected and
the oven was running a manual or preset cook cycle, the oven
shall enter Pause Mode.
Manual Programming Disable
Manual Programming Enable
Single Digit Mode-10 programs
Double Digit Mode-100 programs
Monthly-Display every 30 days
Quarterly-Display every 90 days
Power
100%
100%
100%
100%
100%
100%
100%
100%
100%
100%
" button, a buzzer will ring, but nothing will
In all other cases, the oven shall return to Door open Mode with
User Option OP:61 set, opening and closing the door will clear
out any information about a Manual or Preset Program which was
running.
2) In this mode, "Time Entry" or "Defrost" can not be pressed to
enter cooking setting.
Scan Mode
5.
1)
When the furnace doors is open, the oven will enter the Scan
Mode.
2)
During this mode, "SCAN" will display
3)
Before scanning the barcode of the food, please set the pro-
gram and store it in QR code or USB disk.(See below for detai-
led operation)
4)
If the food programs have store in USB disk, scan the barcode
of the food and the screen will display "SUCCESS".
If the food programs have store in QR code, scan the barcode
of the food and the screen will display "SUCCESS".
Note: The scanner is located just below the control panel.
5)
Press "
" to start cooking.
:
Notes
(1) If the scan is successful but cooking is not started, the menu
will be cancelled automatically after 15 seconds.
(2) If you have set the user option "OP:70", press the "START" but-
ton to start cooking after closing the furnace door. If you have
set the user option "OP:71", close the furnace door to start
cooking directly.
(3) If the scan is successful, code scanner will be activated again
after two minutes.
It will continue to work. If the scan is invalid, you need to wait
for 60 seconds. After that, if the scan is successful, the code
scanner will stop working after 60 seconds.
At the same time, LED display alternates between "DOOR" and
"OPEN". If you want to enter scan mode again, the oven need
to stop and the door need to be closed.
(4) If the scanner does not scan any content within 20 seconds
after starting, it will automatically close after 20 seconds. The
system needs to restart the scanner again.
(5) In scan mode, you cannot enter the cooking settings by pres-
sing the "Time Entry" or "Defrost" key.
(6) After completion of the menu, you can scan other barcode or
QR code after 5 seconds. Or you can scan the same barcode
or QR code after 15 seconds.
18
- 18 -
