adaptor cannot be replaced; if the
cord is damaged, the entire charger
should be discarded.
• Dry the shaver completely before
setting it in the charging adaptor.
• Keep the charging adaptor away
from water and handle it only with
dry hands. Do not use an extension
cord to connect the charging adap¬
tor to an outlet.
• The shaver may not immediately
begin to charge after being placed
into the charging adaptor after use.
Allow the shaver to sit in the charg¬
ing adaptor for a few minutes and
check again to make sure that it is
being charged.
• Do not place any metal objects like
coins and paper clips on the charg¬
ing adaptor as they will become
warm.
• Grip the plug when disconnecting
the charging adaptor from a recep¬
tacle; tugging on the cord may dam¬
age it.
• Store the charging adaptor and its
cord set in a dry area where it will
be protected from damage.
• The outer foil is very thin. If han¬
dled improperly, it can be easily
damaged. To avoid personal injury,
do not use the shaver if it has a
damaged foil or inner blade.
• Wash the shaver in tap water. Do
not use salt water or boiling water.
Also, do not use cleaning products
that are designed for toilets, bath¬
rooms or kitchen appliances. Do
not submerge the shaver for a long
time.
• Do not wipe any part of the shaver
with thinner, benzine or alcohol.
Clean it by using a cloth dampened
with soapy water.
• Do not take the housing apart as
this can affect the watertight con¬
struction.
Specifications
Power source: 100-120/220-240V
AC, 50-60 Hz (Automatic voltage
conversion)
Motor voltage: 2.4 V DC
Charging time: 8 Hours
This product is intended for house¬
hold use only.
READ ALL INSTRUCTIONS BE¬
FORE USE.
FOR YOUR CONVENIENCE, WE HAVE ESTABLISHED A TOLL-FREE
NATIONAL ACCESSORY PURCHASE HOT LINE AT 1-800-338-0552.
(U.S.A. only)
FOR CANADA, PLEASE CONTACT ONE OF THE SALES BRANCHES
MENTIONED ON THE BACK PAGE.
9