Idiomas disponibles
Idiomas disponibles
Problem
Possible Solution
Unit fails to jump-start
Make sure a proper polarity cable
connection has been established.
The unit may be overheated due to
the excessive engine cranking. Make
sure all the unit functions are turned off
and allow the unit to cool down before
resuming operation.
Make sure the unit is not being operated
in the Compressor mode.
Check that the unit has a full charge.
Recharge the unit if necessary.
Portable Compressor
Make sure the Compressor Power
Button has been pressed to turn the
will not inflate
compressor on.
Make sure the unit is not being
operated in the Jump Starter mode.
Make sure the Sure Fit
securely screwed on to the valve stem
when attempting to inflate tires; or that
the nozzle adapter is securely screwed
into the Sure Fit
properly into the item to be inflated on
all other inflatables.
Check that the unit has a full charge.
Recharge the unit if necessary.
Problem
120 Volt AC Outlet will
not power appliance
Nozzle is
®
Nozzle and is inserted
®
24
Possible Solution
Make sure the AC Power Button has
been turned on.
Make sure you have followed all the
steps in the "120 AC Power Outlets"
section carefully. Refer to the important
notes included in that section that
explain common problems and
solutions.
Make sure the combined draw of all
appliances being powered is not more
than 500 watts.
Check that unit has a full charge.
Recharge unit if necessary.
