BEFORE FIRST USE
Check that all accessories are complete and the unit is not
damaged. Fill water into water tank to the MAX level and brew water
for several times without coffee powder, then discard the water.
Clean and dry all detachable parts thoroughly according to the
section "CLEANING AND MAINTENANCE".
SETTING THE CLOCK
To set the clock:
1. Make sure the coffee maker is plugged in. The clock will flash on
the display to indicate that the time has not been set yet.
2. Press the HOUR and then the MINUTE buttons until you reach
the current time. The AM/PM indicator light will appear for PM
and disappear for AM.
NOTE: The time cycle is 12 hours. You must set the clock if you want
to use the delay brew feature.
USING YOUR COFFEE MACHINE
1. Open the top lid and fill the water tank with drinking water. The
water level should not exceed MAX level as indicated on the
water gauge.
2. Place the funnel into the funnel support, make sure it is
assembled correctly, otherwise the top lid cannot be closed.
Place permanent filter in the funnel.
3. Add coffee powder into permanent filter. Usually a cup of
coffee needs a level spoon of coffee powder, but you may adjust
according to personal taste. Close the top lid completely.
4. Place the carafe on to the warming plate horizontally.
5. Plug the power cord into the outlet and set the clock as above.
6
www.hadenusa.com