4. Add medium coarse ground coffee into the filter. Use
approximately 1 level tablespoon of ground coffee per cup of
coffee according to the personal taste. Then close the top lid.
DO NOT exceed 14 level tablespoons of coffee in the filter.
5. Make sure the carafe lid sits properly on the glass carafe. Insert
the carafe into the machine. The inner part of the lid will push
the drip stop up to let the coffee brew through.
6. Plug the power cord into the outlet.
7. Follow the "function setting" to set the function, and finally press
the
icon to start making coffee.
8. The
will flash to indicate that coffee machine is brewing.
9. The brewing process can be interrupted by pressing the
icon once at any time during operation. The coffee machine will
continue brewing once the
Note: You can remove the carafe from the platform during the
brewing process for approximately 30 seconds to pour a cup before
brewing is finished.
10. Immediately after brewing is finished there could still be hot
water in the filter passing through the ground coffee. This can
take 1 to 3 minutes to pass through depending on how much
coffee you used and how fine the coffee was ground. Wait until all
brewed coffee is in the carafe before serving.
11. If you want to make another carafe of coffee immediately after
the first pot, make sure the machine is off and allow it to cool
down for three minutes before refilling the water tank.
Important: Make sure the carafe is empty before brewing.
12. Always turn the coffee maker off and unplug the power cord from
the electrical outlet when the coffee maker is not in use.
Important: Always use caution when opening the lid directly after
brewing, or when the heating platform is on. Hot steam can rise
from inside the machine and cause injury.
8
icon is pressed again.
www.hadenusa.com