Idiomas disponibles
Idiomas disponibles
1a
2
4
1.
Fig. 1 a Place the table on its legs. Then press down the joints of the struts until
they are stretched horizontally.The table gains stability and is ready for use.
To fold the table, proceed as shown in Fig. 1 b.
2.
Mode of operation: by simultaneously turning the cranks, the rear clamping plate
moves. When used as a work table, this adjusts the size of the table surface.
When used as a clamping table, the workpiece is clamped in this way.
3.
To clamp workpieces, insert the clamping jaws into the clamping plates in a
suitable position, two on each side.
1b
3
5
4.
For workpieces with parallel surfaces, rotate the jaws so that their fluted surfaces
hold the workpiece, then clamp firmly.
5.
For round workpieces, rotate the clamping jaws so that their horizontal notches
hold the workpiece, then clamp firmly.
