Idiomas disponibles
Idiomas disponibles
1. When the temperature is lower than the set temperature, the compressor starts and
operates, and the fan starts in deferred mode (air cooling).
2. When the temperature is higher than the set temperature, the compressor and the fan stop
working.
•
Operation
1. Press the "Timer" button to set the automatic stop time when the device is on.
2. Press the "Timer" button to set the automatic start time when the device is ready.
3. The time can be set in a range from 1 hour to 24 hours. Press the (+) or (-) button to increase
or decrease by 1 hour by pressing once.
•
Mode
Press the sleep key to enter the sleep mode (sleep is only valid in the cooling mode)
1. During sleep operation, the internal fan automatically turns to low wind, and set wind speed
is not adjustable; the user's wind speed can be set and the indication changes, but the
actual wind speed is low. After exiting sleep, the user sets the wind speed.
2. After 1 hour, the set temperature rises by 1°C; After another hour, the set temperature will
rise by 1°C. Then operate for another 4 hours (the set temperature will not change within 4
hours) and shut down after a total of 6 hours.
Note:
The main control board has a memory function, when the unit is ready to operate but in the off
state, the main control board can memorise the initialisation of the working mode. When you turn
on the unit, it will operate in the same mode of operation as the last time, without the need to reset
the mode of operation. (This condition is not available when the device is in "
EN
" mode).
