Streifeneder ortho.production ClearSil.compression 70L1 Serie Instrucciones De Uso página 14

1 General Information
Please read this instruction manual carefully before supplying the compression
liner to the user.
Attention!
Serial number and size are engraved laterally on the compression liner.
Note!
Before first skin contact the inner side of the compression liner should be
washed thoroughly with 30 °C (86 °F) warm water and 10H2 Skin-Care
Washlotion.
2 Technical Data
Please refer to our latest catalogue „Prosthetics – lower extremities, socket comfort" for
available liner sizes. To determine the correct liner size, measure the distal circumference approx.
4 cm above the stump end and select the compression liner in the same size.
Length:
Wall thickness:
Material:
3 Designated use
• targeted stump compression after leg amputation
• early accommodation to silicone liner use
• early shaping of the stump
4 Characteristics
• silicone liner without internal matrix and without distal connection
• controlled compression
• bandaging not necessary, therefore no restriction due to wrong bandaging
• enhances blood circulation and reduces oedema accumulation
5 Designated use
The compression liner is to be used exclusively for postoperative compression therapy of leg
residual limbs.
14/32
approx. 400 mm (14.5")
see Fig. 1, dimension sketch based on the ClearSil. Compression Liner
• Clear-Sil-Silicone, firm
• approx. 50 Shore 00
• without textile cover
• with antibacterial finish
• colour: transluzent