blades if they are damaged. Replace them immediately, as
they may cause injury.
• Take care not to scratch the skin when handling the
appliance with the set of blades without combs.
• The A-weighted sound pressure level of the hair clipper for
professional use is below 70 dB(A).
• Designation of the appliance (see technical product
specifications).
HAIR CLIPPER FOR PROFESSIONAL USE
• For cleaning and maintenance, see "CARE AND
MAINTENANCE" chapter.
• The appliance vibration level is below 2.5 m/s
• For purposes of recharging the battery, only use detachable
supply unit provided with this appliance:
Mod. LGSPSD050200 EP or LGSPSD050200 BS or
LGSPSD050200 UL.
• For recharging the appliance, see "RECHARGING THE
BATTERY" chapter.
SAVE THESE INSTRUCTIONS
USE
COMPONENTS
1 Clipper
2 Set of blades for hair, 46 mm
3 On/off switch
4 Cutting length selector
5 Socket for transformer
6 Base
7 Guide combs
8 LED charge control
The appliance can operate either using mains power or in cordless mode, as it has a
rechargeable battery.
MAINS POWER SUPPLY
Connect the transformer the (fig.1- ref. 9) by inserting the plug into the appliance socket (fig.1
- ref.5). Plug the transformer into the mains.
Warning: if the appliance does not work with mains power when the battery charge has run
down completely, switch it off, recharge the battery for about five minutes and then switch back
on again, running on mains power.
BATTERY OPERATION
• Only recharge the battery when you note a clear reduction in appliance power.
• When the battery is fully discharged, the appliance automatically switches off.
RECHARGING THE BATTERY
• The battery must be fully charged before using the device for the first time
• Switch off the appliance using the switch (fig.1 - ref.3). The battery can only be charged when
the appliance is switched off.
• Connect the transformer (fig.1 - ref.9) by inserting the plug into the appliance socket (fig.1 -
ref.5).
9 Charger
10 Cleaning brush
11 Lubricating oil
12 Beard and moustache blade set
(optional; not supplied with the appliance)
13 Sculpting blade set
(optional; not supplied with the appliance)
6
.
2