characterized by symbols. Their compliance guarantees optimal protection against risks and allows ideal
operation of the device. Safety instructions must be available and legible on the devices.
2.1 Principles
Safety instructions are established to avoid errors, dangerous uses and breakdowns. Therefore, the device
must neither be altered nor misused. The device is designed according to currently developed technical rules.
This notice must be kept. The device must be used in premises intended for this purpose and only by a
responsible person with knowledge of the operation of the device.
2.2Intended use
The operation of the device and the safety of use are only guaranteed in the event of normal and correct use
of it. Assembly and technical interventions must be carried out by professionals.
ATTENTION
Any other use is considered non-compliant. Any accusation linked to improper use of the device is not
admissible and will be void. Intended use corresponds to use described in these instructions for use. Proper
use corresponds to compliance with safety, hygiene, cleaning and maintenance rules.
2.3Safety instructions when using the device
The information relating to occupational safety refers to the European Union regulations valid at the time of
manufacture of the device. For commercial use of the device, the operator undertakes, throughout the duration
of its use, to verify the conformity of the measures cited in terms of work safety with the current state of the
arsenal of advice and to comply with the new regulations.
For non-EU countries, the laws and provisions of the country must be respected. All environmental protection
provisions must also be respected.
ATTENTION
The device must be operated by people with sufficient physical and intellectual means. People with limited
physical and intellectual means must be supervised to use this device. Use prohibited by children and minors
(exceptions made within a legal framework provided for by law)
If the device is used by a third party, the instructions for use must be available before any use. Any new user
must have read the instructions for use.
The device must only be used in premises intended for this purpose.
3. TRANSPORT, PACKAGING AND STORAGE
3.1 Inspection following transport
Verification of the absence of damage and the completeness of the device must be carried out upon receipt of
the package. If transport damage is identified, refuse or accept the delivered product only with reservation*. A
complaint detailing the defects noted must subsequently be made. The collection of damages is only possible
in the event of a complaint made within the stipulated time limits, i.e. 24-48 hours maximum.
*written on the carrier's paper or digital delivery notes.
3.2Packaging
The packaging of the device must be kept in the event of moving, or for return to after-sales service. The interior
and exterior packaging must be completely removed before using the device. The standards in force in your
country regarding environmental protection must be respected before destruction of the packaging.
3.3. Storage
EN