Idiomas disponibles
Idiomas disponibles
English
Positioning and levelling the appliance
Place the refrigerator on a stable and level floor. In case the floor is not perfectly level,
use the two adjustable feet on the front part of the fridge. To ensure major stability,
easier movement and a correct positioning of the product, two additional wheels are
present at the rear. In any case we recommend moving the fridge very carefully in
order to avoid floor damage (especially in case of wooden floor).
Electrical connection
Before switching the refrigerator on for the first time, leave it vertical for at least two
hours. Then connect the appliance's power supply lead to a mains socket with earth
contact, installed in accordance with electrical safety regulations. The rated voltage
and frequency are stated on the nameplate. The appliance must be connected to the
electrical mains and earthed in compliance with the relevant regulations and
requirements. The appliance is able to withstand short fluctuations in voltage of no
more than 15% less or 10% more than the rated voltage stated on the nameplate. If
the power supply lead has to be replaced, this operation must only be carried out by a
qualified technician. The socket must be accessible after the appliance has been
placed.
Product Description
1. Adjustable Foot
3. Dip Tray
5. Freezer Compartment
7. Bottle Rack
There is a freezer compartment in the upper section of the unit that can be closed by
a door. The main storage area is under the freezer compartment.
Before using for the first time
Clean the parts of the refrigerator with lukewarm water on a soft cloth or with a neutral
detergent and with clear water, then wipe them dry.
Notes: Electric parts of the refrigerator can only be wiped by dry cloth. Turn the
thermostat knob on the "3" position and turn on electricity. The compressor and the
light inside the refrigerator begin to work. Close the door and wait 30 minutes. If the
temperature in the freezer compartment decreased obviously, it shows that the
refrigerator system works well. When the refrigerator operates for a period of time,
the temperature controller will automatically set the temperature on conditions that
the door is not too often opened. If the above steps are successful, the trial operations
are finished. The refrigerator works normally.
2. Temperature Control Knob
4. Removable shelves
6. Dairy Rack
6
