Idiomas disponibles
Idiomas disponibles
SHARPENING THE CUTTING BLADES
1.
Start and stop your hedge trimmer until the cutter
blade and the guard are slightly offset. This will allow
clearance for the file between cutter teeth and guard
teeth.
2.
Remove the battery pack from your hedge trimmer.
3.
Clamp the blade assembly in a vise and file the exposed
cutting surface of each blade tooth. Remove as little
material as possible. Be sure to retain the original angle
of each tooth when filing.
4.
Remove the hedge trimmer from the vise; restart it and
stop it to expose the unsharpened edges of the blade
teeth.
5.
Remove the battery pack and repeat the sharpening
procedure above.
LUBRICATING THE BLADES
For best operation and longer blade life, lubricate the
hedge trimmer blade with lightweight machine oil before
and after each use.
1.
Remove the battery pack from the hedge trimmer.
2.
Lay the hedge trimmer on a flat surface. Apply some
lightweight machine oil along the edge of the top blade.
If you will be using the hedge trimmer for an extended
period, it is advisable to stop, remove the battery, and oil
the blade during use.
This product is warranted free from defects in material and workmanship for 2 years after date of purchase. This limited
warranty does not cover normal wear and tear or damage from neglect or accident. The original purchaser is covered by
this warranty and it is not transferable. Prior to returning your tool to store location of purchase, please call our Toll-Free
Help Line for possible solutions.
THIS PRODUCT IS NOT WARRANTED IF USED FOR INDUSTRIAL OR COMMERCIAL PURPOSES.
ACCESSORIES INCLUDED IN THIS KIT ARE NOT COVERED BY THE 2 YEAR WARRANTY.
For questions about this or any other GENESIS™ Product, please call Toll-Free:
www.genesispowertools.com
Or visit our web site:
MAINTENANCE
NOTE:
is running.
TRANSPORTING AND STORING
• Always place the blade cover (8-FIG 1) on the blade
• Clean the hedge trimmer thoroughly before storing.
• Store the hedge trimmer indoors, in a dry place that is
• Keep away from corrosive agents such as garden
TWO-YEAR WARRANTY
TOLL-FREE HELP LINE
©Richpower Industries, Inc. All Rights reserved
Richpower Industries, Inc.
736 Hampton Road
Williamston, SC 29697
Printed in China, on recycled paper
ENGLISH
Do not oil the blades while the hedge trimmer
before storing or transporting the hedge trimmer. Use
caution to avoid the sharp teeth of the blade.
inaccessible to children.
chemicals and deicing salts.
WARNING:
handling the blade assembly, wear non-slip, heavy-duty,
protective gloves. Do not place your hand or fingers
between blades or in any position where they could get
pinched or cut. NEVER touch blades or service the unit
with battery pack installed.
888-552-8665
Blades are sharp. When
.
9
