Idiomas disponibles
Idiomas disponibles
Connect Apple iOS device in Application Mode
Please check with your scanner application vendor or visit
www.socketmobile.com/appstore
supports the scanner.
If you are using the scanner with an Apple iOS device and a scanner-enabled
Application that does not provide instructions how to connect your scanner,
please use the following steps.
1.
Power on the scanner. Make sure the scanner is discoverable (unpaired).
The Blue light should be blinking fast.
2. Scan the barcode to change the profile to Application Mode (MFI-SPP).
3. Turn on Bluetooth on the Apple device. Go to Settings > Bluetooth. A
Bluetooth Devices search will begin.
4. Tap Socket S8xx[xxxxxx] in the list of other devices found. After a few
seconds the status will change to "Connected" and the LED will stop
blinking and turn solid blue.
Note: The characters in brackets are the last 6 characters of the Bluetooth
Address.
Application Mode
to confirm your scanner-enabled application
Use with iPad, iPod touch, and iPhones.
11
