Sunny Health & Fitness SF-RW521020 Manual Del Usuario página 7

We value your experience using Sunny Health and Fitness products. For assistance with parts or
troubleshooting, please contact us at [email protected] 1-877-90SUNNY (877-907-
8669).
STEP 6:
Attach the Sliding Rail (No. 2) to the Main
Frame (No. 1) by securing 2 Bolts (No. 31)
onto the left and right sides of the Main Frame
(No. 1). Don't tighten the Bolts (No. 31) now.
Secure 4 Bolts (No. 9) and 4 Washers (No. 7)
to the bottom of the Main Frame (No. 1).
Tighten all the 4 Bolts (No. 9) and 2 Bolts
(No. 31) with Allen Wrench (No. 73) now.
STEP 7:
Remove 4 Bolts (No. 38) from the back of the
Computer (No. 37) with the Spanner (No.
74).
First insert Computer Wires A/B (No. 37A/B)
through Computer Support (No. 36), then
attach the Computer (No. 37) to the
Computer Support (No. 36) using 4 Bolts
(No. 38) that were removed. Tighten and
secure with Spanner (No. 74).
Connect the Sensor Wire A (No. 39A) to the
Computer Wire A (No. 37A) and connect the
Sensor Wire B (No. 39B) to the Computer
Wire B (No. 37B). Next, Insert the connected
wire into Computer Supporting Tube (No.
34).
Attach the Computer Support (No. 36) to
Computer Supporting Tube (No. 34) using 2
Bolts (No. 35) and 2 Spring Washers (No. 8).
Tighten and secure with Allen Wrench (No.
73) and Spanner (No. 74).
The assembly is complete!
6