Hoover HFX Manual De Usuario página 10

5.5 BLOCKAGES
If your product is still working but has low or no suction, you may have a blockage.
Carry out all maintenance instructions included in sections, 7.1, 7.2 & 7.3.
The following additional areas of your product should also checked for any debris or blockages:
1. Switch off your product.
2. Separate the floor nozzle, the main body and the handheld unit as per previous instructions.
3. Remove the nozzle window and brushbar from the nozzle as per previous instructions.
4. Position the nozzle neck vertically and visually check for any debris or obstructions and clear.
5. Visually check the handheld inlet connection area for any debris or obstructions and clear.
6. Visually check both ends of the main body, metal mesh and air inlet, and remove any debris or
obstructions.
Re-Assemble your product.
1
4
6. IMPORTANT INFORMATION
Hoover Spares and Consumables
Always replace parts with genuine Hoover spares. These are available from your local Hoover dealer or direct from
Hoover. When ordering parts always quote your model number.
Quality
Hoover's factories have been independently assessed for quality. Our products are made using a quality system
which meets the requirements of ISO 9001.
Your Guarantee
The guarantee conditions for this appliance are as defined by our representative in the country in which it is sold.
Details regarding these conditions can be obtained from the dealer from whom the appliance was purchased. The
bill of sale or receipt must be produced when making any claim under the terms of this guarantee.
2 YEAR BATTERY WARRANTY
IMPORTANT: The battery in this cleaner is guaranteed for 2 year from the date of purchase. After 2 year the
customer is liable for the cost of a new battery.
Subject to change without notice.
2
5
10
GB
3
6