Idiomas disponibles
Idiomas disponibles
Single system setup
Step 1: Connect and power up the receiver
① Connect antennas to the receiver via ANT jacks.
② Connect the power supply to the receiver via the power jack.
③ Connect the audio output to an amplifier/speaker or mixer via 1/4" mixed output jack
or XLR audio output jack.
④ Long press (2s) the power button on the receiver's front panel to turn on the receiver.
X
X
X
AF OUTPUT
ANT.3
BALANCED 4
①
Step 2: Turn on transmitters
① Install fresh batteries with the correct polarity.
② Long press power buttons to turn on transmitters.
*NOTE:
The LCD screens of handheld and bodypack transmitters turn dim in standby mode.
The LED light on top of the bodypack transmitter remains green to indicate it is turned on.
①
Turn on the bodypack transmitter
Operation Guidance
X
12~15V
X
X
X
150mA
X
X
X
+
AF OUTPUT
AF OUTPUT
AF OUTPUT
—
—
—
MIX OUT
ANT.2
BALANCED 3
BALANCED 2
BALANCED 1
②
®
③
ANT.1
②
ON
6
ON
POWER
④
ON
②
Turn on the handheld microphone
①
