Intec I-60/2 Manual Del Usuario página 12

Idiomas disponibles
  • ES

Idiomas disponibles

WARNING
1.
PRIOR TO USE, READ AND UNDERSTAND PRODUCT SAFETY INFORMATION. Failure
to follow the instructions may result in EXPLOSION OR FIRE which may result in
serious injury, death and damage to device or property.
2.
Jump for 12V vehicles , it would be hazard if for other jumping.
3.
DO NOT use this unit if any cable clamp or cord is damaged.
4.
DO NOT use in place of a vehicle battery.
5.
Never remain the unit on car battery after cranking the car success.
6.
Make sure to check all the battery connections are CLEAN before Jump Starting! Make
sure the battery clamps are well connected! If the battery terminals on the vehicle are
dirty or corroded, the power of the unit will be lessened.
7.
Do NOT Jump Start more than 3 times in a row. It could damage the unit by overheating.
When starting up multiple times, each start-up interval is two minutes.
8.
Remove the product from the vehicle battery within 30 seconds of Jump Starting. If not,
it could lead to damage.
9.
Do NOT connect the two clamps together.
10. Do NOT use by young or infirm persons without supervision.
11. Do NOT use as a toy.
12. Do NOT allow the product to become wet.
13. Do NOT immerse the product in water.
14. Do NOT operate the product in explosive atmospheres, such as in the presence of
flammable liquids, gases or dust.
15. Do NOT modify or disassemble the Jump Starter. Only a repair technician may repair this
unit.
16. Do NOT expose product to extreme heat or fire.
17. Make sure someone should be within range of your voice or close enough to come to your
aid when working with batteries.
18. Remove personal metal items like rings, bracelets, necklaces, etc. When using the
products.
12
loading