Idiomas disponibles
Idiomas disponibles
5. Technical specification
Headlight dimensions: height: 50 mm | length: 44 mm | width: 64 mm | weight: 74 g |
light level intensity: 60 Lux
Requirement: 6 V AC (dynamo operation)
NOTICE
If you need special e-bike headlights for a DC voltage range between 6 and 42 V, please
contact your local specialist retailer.
6. Assembly
6.1. General assembly instructions
!
Make sure the headlight is not covered under any circumstances. Also, take care that the headlight
has been mounted and aligned as prescribed. Align the front reflector
Germany, the prescribed mounting height for headlights
120 cm. For details, consult your national Road Traffic Regulations or contact a local bicycle specialist
retailer. Always make sure the headlight is mounted and aligned in a way to ensure that oncoming
traffic is not blinded.
18
3
vertically to the road.
and front reflectors
is between 40 and
1
3
WARNING
Never mount brackets on conical components! To avoid falls, accidents and
severe injuries, always use the enclosed Busch+Müller assembly bracket
improperly positioned brackets are used, the headlight may loosen and change position, slide
down and, in the worst case, get caught in the wheel spokes.
NOTICE
Make sure to tighten all screws in a way to ensure the headlight
itself. This is especially important when cycling on uneven terrain.
. If unsuitable or
2
1
cannot move all by
19
