How To Use; After Use; Care And Maintenance - Rio PROFESSIONAL ELECTRIC NAIL FILE Manual Del Usuario

A. Plug double-ended Connector Cable into the Control Unit and the
base of the Handpiece.
B. Press and hold the ON/OFF/DIRECTION button to turn the unit on.
Press the button again to toggle between forward (F) and reverse (R).
C. Turn the Dial to power on the Handpiece; turning clockwise to increase
the speed and anti-clockwise to decrease.
D. To turn off, press and hold the ON/OFF/DIRECTION button.
• Switch the unit off and unplug Handpiece from the Control Unit.
• Ensure the Blank Pin is fitted into the Collet.

CARE AND MAINTENANCE

Tools should be cleaned and sterilised after each use.
NEED TO CHARGE YOUR PHONE?
Simply plug your phone's USB Charging Cable into the USB ''Out'' port.
The speed must be set to 00RPM for the phone to charge.
IMPORTANT INFORMATION
There are no user serviceable parts inside the unit.
Model: NAPE
Input USB: 5.0V
Output USB: 5.0V
Output to Handpiece: 12.0V
Drill Speed: 0-35,000 rpm
Battery: Li-Ion 11.1V 2600mAh

3 HOW TO USE

AFTER USE

SPECIFICATION
900mA 
3000mA 
210mA Max.
6