Lorex Aurora Serie Guía Configuración Rápida página 10

EN - Camera Installation
Warning! Ensure the mounting surface supports
3.18 lbs/1.4 kg, 3× the camera's weight.
1. Use the mounting template to mark
and drill holes for screws and the
camera's cable.
Note: To route cables along a wall,
use the camera's cable notch.
2. Insert anchors for surfaces like
drywall, wood, brick, masonry, or
concrete.
3. Guide the camera's cable through
the surface opening or cable notch.
4. Connect one end of the Ethernet
cable into the camera's Ethernet
connector and the other end into the
NVR's PoE port.
5. Secure the weather-resistant cap by
twisting it onto the camera's Ethernet
connector. If exposed to rain, seal it
with silicone or electrical tape.
6