Idiomas disponibles
Idiomas disponibles
OPERATING AND MAINTENANCE MANUAL
SPEEDBOX DUO SERIES ELECTRONIC VARIATOR
11. EXPERT MENU
Special configuration, these values do not need to be set, they are factory defaults. Correct
values using
and ENTER to store data. After each ENTER the different screens that
make up the configuration sequence follow one after the other automatically. Press MENU
to exit this sequence at any time, saving the values modified up to that moment.
14. LOGGING OF FUNCTIONS AND ALARMS.
Press MENU +
ter, press ENTER to advance through the register, and press ENTER again to return to the
main menu at the end of the last register. The display sequence is as follows:
www.proindecsa.com / [email protected]
Press and hold MENU+ENTER 3 seconds
The maximum operating frequency can be set using the push buttons
PI parameter, factory set. Any questions please contact the manufacturer.
Usando los pulsadores
Using the
Using the
disconnect the black wire (fig.4).
Using the
disconnect the black wire (fig.4).
keys simultaneously for 3" to access the functions and alarms regis-
se puede ajustar la aceleración.
pushbuttons the deceleration can be adjusted. Range 5-20 (Hz/s). Press ENTER to confirm.
buttons you can select the type of motor: Single-phase / Three-phase. In the single-phase case
buttons you can select the type of motor: Single-phase / Three-phase. In the single-phase case
21
