Eaton TRIPP LITE B004-DP2UA2-K Guia De Inicio Rapido página 3

Kvm de 2 puertos displayport 1.2 con compartido de periféricos usb

Idiomas disponibles

Installation

Instalación / Installation /

Installation / Installazione

Notes:

•

Before making any connections, make sure power to all devices being connected to the KVM switch is turned

off. Unplug the power cords of any computers that have the Keyboard Power On function.

•

It is recommended that the total length between the console monitor and connected computers (including

the KVM) not exceed 10 ft. (3 m).

1. Connect your monitor to the DisplayPort console port on the KVM switch.

connect a DVI, HDMI or VGA monitor using a DisplayPort to DVI, HDMI or VGA adapter (see the Features and

Optional Accessories sections of the owner's manual for details).

If the computers you are connecting have graphics cards that support Multi-Stream Transfer

(MST), and you wish to connect multiple monitors, you can connect an MST Hub to the

DisplayPort console port on the KVM switch. You can then connect multiple monitors to the

monitor ports on the MST hub, and use the computer's graphics card display settings to

customize how video is being displayed. This can also be achieved without an MST hub when

using DisplayPort monitors that feature MST input and output ports for chaining multiple

monitors together.

2. Connect your USB keyboard and mouse to the corresponding USB console ports of the

KVM switch (the console mouse port is on top, and keyboard port on bottom).

3. (Optional) A USB hub can be connected to the USB console mouse port, allowing you to

add multiple USB peripherals to your installation.

with an external power supply. Also, the KVM's Mouse Emulation Mode must be disabled (see the Hotkey

section of the owner's manual for details) when connecting a hub.

4. Connect your speakers to the console audio jack on the KVM switch.

5. Connect a set of computer monitor, keyboard/mouse and audio ports on the KVM switch

to a computer using the included DisplayPort, USB and 3.5 mm stereo audio cables.

6. (Optional) Repeat step 5 to connect a second computer.

7. (Optional) Connect the Remote Port Selector to the corresponding 3.5 mm jack on the

KVM switch.

8. Turn on the power to all connected devices. The KVM switch focus will automatically switch

to the first computer that is powered on.

23-09-101-9348BD_revA.indd 3

Note: To ensure proper functionality, use a hub

Note: You can

2/27/2024 12:41:23 PM