Idiomas disponibles
Idiomas disponibles
a
Quick start guide
Desktop LED lamp
For more information see the extended manual online:
ned.is/ltlgq4m2xx
Intended use
The Nedis LTLGQ4M2xx is a desktop LED lamp with a built-in wireless
charger.
The product is intended for indoor use only.
This product is intended to be used in household and similar
applications such as kitchen areas.
The product is not intended for professional use.
This product can be used by children aged from 8 years and above
and persons with reduced physical, sensory or mental capabilities
or lack of experience and knowledge if they have been given
supervision or instruction concerning use of the product in a safe way
and understand the hazards involved. Children shall not play with
the product. Cleaning and user maintenance shall not be done by
children without supervision.
Any modification of the product may have consequences for safety,
warranty and proper functioning.
Main parts (image A)
1
LED lamp
Power input
2
Power adapter
3
4
Wireless charging area
Safety instructions
-
WARNING
• Ensure you have fully read and understood the instructions in this
document before you install or use the product. Keep the
packaging and this document for future reference.
• Only use the product as described in this document.
• Do not use the product if a part is damaged or defective. Replace a
damaged or defective product immediately.
• Do not drop the product and avoid bumping.
• This product may only be serviced by a qualified technician for
maintenance to reduce the risk of electric shock.
• Do not expose the product to water or moisture.
• Only use the provided power cable.
• Unplug the product from the power source and other equipment
if problems occur.
• Do not unplug the product by pulling on the cable. Always grasp
the plug and pull.
LTLGQ4M2xx
5
Light mode button
Power button
6
Timer button
7
Connecting the product
1. Plug the power adapter A
2. Plug the other end of the power adapter A
Using the lamp
1. Press the power button A
2. Press and hold the power button A
LED lamp A
1
.
3. Press the light mode button A
light modes.
The light modes are Natural, Cool and Warm.
4
4. Press the power button A
use.
Using the timer
1. Press and hold the timer button A
The LED lamp A
1
flashes twice to indicate the timer is active.
4
The LED lamp A
1
switches off after the timer runs out.
4
Using the wireless charger
1. Place your device on the wireless charging area A
Disposal
The product is designated for separate collection at
an appropriate collection point. Do not dispose of the
product with household waste.
For more information, contact the retailer or the local
authority responsible for the waste management.
Declaration of Conformity
We, Nedis B.V. declare as manufacturer that the product LTLGQ4M2BK
/ LTLGQ4M2WT from our brand Nedis®, produced in China, has been
tested according to all relevant CE standards and regulations and
that all tests have been passed successfully. This includes, but is not
limited to the RED 2014/53/EU regulation.
The complete Declaration of Conformity (and the safety datasheet if
applicable) can be found and downloaded via:
nedis.com/LTLGQ4M2xx#support
c
Kurzanleitung
Schreibtisch-LED-Lampe
Weitere Informationen finden Sie in der erweiterten
Anleitung online: ned.is/ltlgq4m2xx
4
into the power input A
3
2
3
into a power outlet.
to switch on the LED lamp A
6
6
to change the brightness of
5
to cycle through the different
to switch off the LED lamp A
6
7
to set a timer for 40 minutes.
4
.
LTLGQ4M2xx
.
.
1
1
after
