Idiomas disponibles
Idiomas disponibles
MONZA
- USING YOUR CEILING FAN
REMOTE CONTROL
1. Test the remote by pressing and hold any button. A green LED will be lit up at the top of the remote to
indicate that there is power to the remote and it is ready for use to control the fan.
2. Follow the guide below to operate the fan and learn the functions.
NOTE: when you turn on the fan for the first time or switch the main power to the receiver, you need to start
the fan on high "6" speed first and then choose a lower speed. A 5-10 seconds is required to allow the DC fan
to respond to the remote each speed or fan direction selections.
The receiver has memory function. If the fan is turned off by the isolating switch over 7 seconds, the next time
to turn on the fan will be on last setting.
REPAIRING THE FAN RECEIVER & REMOTE PAIRING
NOTE: The pairing of the remote and receiver has been done at the factory.
When the ceiling fan is installed, pairing the fan receiver and remote is NOT required.
53 | Page
