Idiomas disponibles
Idiomas disponibles
04. Learn to Use the Treadmill
4. Automatic Control Mode Description
Automatic
This mode is difficult to control and can be used completely
without the remote control. It is advised to use this mode only
after having gain experience.
Use the remote control to start and stop the treadmill, and the
switch mode button is effective under this mode.
Note: The automatic control mode is only available under
walking mode.
The treadmill will speed
up by standing on this
area under automatic.
The treadmill will slow
down by standing on this
area under automatic.
5. Remote Control Paring Instructions
If the remote control does not respond or you have replaced
the remote control, you need to pair it again.
Pairing method: Restart the treadmill and press and hold
the Mode button on the remote control AT THE SAME TIME
for 5 seconds.
6. Connection Caution Light
Not connected to APP：Will flicker
Connected to APP：Off
7. Fault Caution Light
E01: Software overcurrent
E08: Sensor fault
E02: Hardware overcurrent
E09: Motor unable to start
E03: IPM Module Overheating
E12: Motor overcurrent
E04: Low-voltage Protection
protection
E05: High-voltage Protection
E13: Overloading protection
E06: Motor phase loss protection
E14: Hall signal loss
E07: Motor block rotation protection
E15: Communication fault
05. Trademark and Legal Notice
The patents involved in Kingsmith WalkingPad Treadmill
series products are made by Beijing Kingsmith Technology
Co., Ltd. and owned by the Company. No organization or
individual may copy, distribute all or any part of this manual
without Kingsmith's written permission, and may not use
these patents without authorization.
When printing this manual, we have put various functional
descriptions and instructions in it as far as possible.
However, due to the continuous improvement of product
functions and design changes, there may still be discrep-
ancies with the products you purchased. Due to product
update, this manual may deviate from the actual product in
terms of color, appearance, etc. Please refer to the actual
product.
