Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Cod. 97864
V09_17
REF. 5276 STAND-ALONE CONTROLLER 1DOOR WG
Manual de usuario
Introduction
The mini single door controller, allow increasing the security of access control installations by avoiding sabotage, since
they do include the opening mechanisms and the exit button terminals. It uses Atmel microcontroller to assure stable
performance, and equips with an infrared remote control for easy operation
Features
-1,000 users' user data can be transferred
- Multi access modes: Card, Card or PIN, Card with PIN and multi Cards/PINs
- Can connect with reader with Wiegand 26 bits output
- Can connect with any keypad reader with 4bits, 8bits (ASCII), or 10bits Virtual number output
- Support Master Card function
Specifications
Stand-alone mini controller 1 door Wiegand
Model
User Capacity
Multi access modes
Operating Voltage
Idle current
*Relay
Adjustable Relay Output Time
Protocol
Physical
Distance
Operating Temperature
Dimensions
Humidity
When Use NO/NC/COM Dry Contact Output
EN
Stand-alone MINI controller 1 door Wiegand
1.000
Card, Card or PIN, Card with PIN and Multi Cards/PINs
12Vdc (9-24VDC)
20mA / 110mA
2Amp Maximum
1-99 (5 seconds default)
Wiegand 26bits
ABS
20m.Max.
-20ºC a +60ºC
54mm × 65mm × 9mm
90%
*
1) Remove the Pin Caps on points 1, 2 and
points 3, 4
2) Insert one of the Pin Caps on points 1, 3
3) Fix the back cover, and keep the other Pin
Cap well
1
Tabla de contenido
