Tabla de contenido
Idiomas disponibles
Idiomas disponibles
To remove the abrasive roller follow these steps:
1. Hold the abrasive roller.
2. Slide up the eject button roller 3 and pull the tip of the
support outwards.
3. Remove the abrasive roller used.
4. Insert the new roller by matching the larger hole with the
motor shaft, then release the tip of the support by
matching the metal tip with smaller hole.
5. Verify that the roller is properly engaged.
CLEANING
We recommend cleaning the callus remover after each use,
cleaning has to be done with the power off.
1. Remove the abrasive roller 2, with cleaning brush 7 clean
the area where the abrasive roller is housed 2. After using
the cleaning brush 7 clean the abrasive roller 2.
2. The plastic surface of the appliance can be cleaned with a
damp cloth, then dry with a dry. Do not use alcohol or
abrasives.
Note:
The head can be removed for easy cleaning, press the 4
button to remove the head.
1º
7
2º
Tabla de contenido
