Idiomas disponibles
Idiomas disponibles
LED INDICATOR LIGHT (FIG. 10)
When incorrect operation causes tool failure,
the green LED indicator light will flash. Different
flashing frequencies are described in the table
below:
Flashing frequency
Flashing slowly.
Flashing fast.
Problem
Battery pack under voltage.
Battery pack is too hot.
Tool electronics are too hot
after continuous operation.
Poor connection or other
electric connection failure.
Electronic components
failure.
The tool came to a stall. Or
short circuit.
Fig. 10
LED Indicator Light
Charge the battery pack or use a different
battery pack.
Allow the battery pack to cool down, then
restart the tool.
Allow the tool to cool down.
Remove and reattach the battery pack,
then restart the tool.
Or contact authorized service center for
repairs.
Contact authorized service center for
repairs.
Restart the tool.
Or contact authorized service center for
repairs.
-15-
Solution
