GB
Do not use the appliance if it is still connected to the power supply unit or the mains.
The appliance must always be disconnected from the power supply when unatten-
ded or not in use, and when it is being cleaned or stored.
Do not use the appliance with wet hands or if you are standing on a wet surface.
If the battery has leaked, do not let the battery acid come into contact with skin,
eyes and mucous membranes. In the event of contact with the battery acid,
rinse the affected areas immediately with plenty of clean water and consult a
doctor immediately.
The battery must not be taken apart, thrown into a fire, immersed in liquids or
short-circuited.
The battery is not waterproof. Only charge the battery in dry indoor areas.
Store the battery in a dry, frost-free place.
Do not cover the battery during the charging process.
Disconnect the battery from the power supply when charging is complete.
Remove the battery from the handcart when you are not using it.
Before using for the first time
CAUTION!
Choking hazard due to plastic film and bags! Keep children and pets away from the packaging material.
Check the set for completeness and any transport damage. You can find the delivery scope of the set you
have purchased in the packaging, or in the separate insert. Please contact our customer service in the event
of any complaints.
Remove the packaging material and any labels on the product that are used for transportprotectionor advertising.
Fully charge the battery using the supplied charging cable.
Charging the battery
1. Connect the battery to a working socket using the charging cable supplied.
2. The charging indicator light on the power supply unit lights up red during the charging process.
3. When the battery is 100% charged, the charging indicator light will turn green.
Preparation
Check the charge level of the battery before use.
- To do this, press the button on the battery; the charge status is indicated by the LEDs.
Unfold the folding frame completely.
Place the battery within the housing of the cart and secure it using the Velcro tape (see fig. A).
Place the fabric insert in the folding frame
Connect the underside of the fabric insert to the centre strut of the folding frame using the Velcro tape (see fig. B).
Attach the sides of the fabric insert to the folding frame using the Velcro straps.
14
Instruction manual