TROUBLESHOOTING
MALFUNCTION
POSSIBLE REASONS
MOTOR DOES
Battery is power off
NOT TURN ON
The hand-held vacuum cleaner
is not properly installed in the
body assembly (because the
body assembly requires a hand-
held vacuum cleaner to provide
power, which itself cannot work
independently)
SUCTION
Dust cup has been full of dust
REDUCED
The Filter is full of dust
Air duct of the Electric brush is blocked
or roller brush stall
The battery is low
CHARGING
The hand-held vacuum cleaner is not
INDICATOR DOES
fitted to the body assembly
NOT FLASH
RECYCLE WHEN
CHARGING
THE USING
The charging time is insufficient
TIME IS NOT
ENOUGH AFTER
CHARGING
16
SOLUTIONS
Charge the vacuum cleaner
Correctly install the hand-held
vacuum cleaner and body assembly
Dump the dust in the dust cup
Clean or replace the Filter
Clean the garbage
attached to the electric roller brush
Fully charge the battery as indicated
in the charging section
Properly assemble the hand-held
vacuum cleaner and the body
assembly
Fully charge the battery as indicated
in the charging section