Idiomas disponibles
Idiomas disponibles
6. Connect CS141 with your network
Connect the LAN port of your CS141 with the according network
node.
7. Login and check settings
1. Enter the IP address of your CS141 and log in with current
passwords.
2. The upper area should show „OK."
At the UPS monitor, UPS operational state data will be displayed.
3. The quick configuration is finished, the CS141 will monitor and log
your UPS.
8. Using the DHCP mode
For the DHCP mode, an internal DHCP server is mandatory. In
this operating mode, the CS141 will query for a valid IP address.
A local IP address configuration is not necessary, but we recom-
mend to use the manual option:
If the DHCP server is not reachable, the CS141 will boot and start
with a manually configured IP address.
Furthermore, some options like RCCMD requires a static IP
address. The DHCP server may change it dynamically.
.
How to activate the DHCP mode:
1. Put the sliding switch to the right position.
2. Connect the power supply or insert the slot card into the
according slot of the UPS.
3. Connect the CS141 with your local network.
The CS141 will start and boot with the IP address provided by the
local DHCP server. Access the CS141 with the according IP
address directly.
Note:
Do not forget to configure the UPS model and for more informati-
on as well as the complete CS141 user's guide, visit us on
www.salicru.com.
Advanced Services and RCCMD
1. Additional Services
To increase cybersecurity, all additional services are switched off
by default. Open „Services>Setup" to enable services. Note: Ad-
vanced service configuration is required. Furthermore, it is not
recommended to enable unused or not configured services.
2. Using RCCMD shutdown services
For this configuration, an RCCMD client must be installed on the target system.
RCCMD is an extra software ready for download at https://salicru.com/.
1. At UPS events, search for "Power Fail" and click "+" to start the
job configuration dialog.
2. At the job configuration dialog, select the job "RCCMD shutdown".
3. Enter the IP address and define the shutdown time window.
Sliding switch to right
EU: 230V AC / 12V DC
US: 120V AC / 12V DC
https://www.salicru.com
